Dogwood Guitars

  • Home
  • About
  • Guitars
    • Dogwood Models
    • Guitar Galleries
    • Ordering your Dogwood Guitar
    • FAQ’s
  • Services
  • Lutherie Classes
  • Pictorials
    • Repairs
    • How to Correctly String a Guitar
    • Building A Monarch
    • Making a Spalted Maple Rosette
    • Pearl and Abalone Inlay
  • Articles
    • Technical
    • Viewpoint
  • Testimonials
  • YouTube
  • Contact
You are here: Home / Pictorials / Repairs / 1932 Martin 0-18 Parlor Guitar

1932 Martin 0-18 Parlor Guitar

It’s not often that a luthier has the opportunity to work on a pre-war Martin. This little 1932 Parlor 0-18 came to the shop in very rough condition. It took a tumble down some stairs, resulting in a long crack in the treble side of the body and several smaller cracks. In addition to this damage the guitar had several issues including a very bad neck angle. The wood and the finish were extremely dry and fragile, but hey- this guitar is 80 years old! I did the work for a family friend (the guitar belonged to her grandfather) and the goal was to make the guitar playable and to restore the structural integrity while keeping the cost as affordable as possible. Check out the photo gallery below for photos of the work.

[Show as slideshow]
dscn1451
dscn1452
dscn1454

dscn1455
dscn1456
img_0179

img_0181
img_0153
img_0154

img_0156
img_0155
img_0158

img_0159
img_0157
img_0160

img_0165
img_0161
img_0167

img_0162
img_0164
img_0163

12►

  • Email
  • Facebook
  • YouTube
This error message is only visible to WordPress admins

Error: No connected account.

Please go to the Instagram Feed settings page to connect an account.

Gibson Side Crack

Gibson Artist Side Cracks This guitar was brought to me with some serious bass side damage- the owner had been keeping time on the side with his hand during a break and had cracked the side badly. The cracks ran from the shoulder all the way to … [Read More...]

Customer Testimonials: Morgan Monroe

Greg... Thanks again for the top notch work you performed on my Morgan Monroe. Although this guitar is an expendable "gigging" tool you made it sound and play like a much more expensive instrument. It sure is comforting to know someone with your … [Read More...]

Making a Spalted Maple Rosette

The rosette on an acoustic guitar, along with the peghead and bridge designs, is a big part of the custom builder's signature. Often a particular design will immediately identify the guitar as being made by a specific individual. Perhaps the amazing … [Read More...]

Guitar Building, Voicing, and Repair Classes

Greg loves teaching guitar building and repair as much as he loves building guitars himself. Although not currently taking on an apprentice, Greg is offering individual classes in three areas: Acoustic and Electric Guitar Setup and Repair, Guitar … [Read More...]

Blog: Jumbo inlay

Work continues on the Rosewood Kingston Jumbo this week, with the gold Mother of Pearl and Abalone fretboard inlay work. These crown type position markers are beautiful and I love the old-school appearance that calls to mind the Gibson SJ-200 and … [Read More...]

Pearl and Abalone Inlay

One of the most beautiful customizations to a musical instrument is the addition of shell inlay. Typically this might include peghead decorations, fretboard position markers or more elaborate motifs such as vines and flowers, and body purflings. … [Read More...]

Visit us on YouTube…

Follow Dogwood Guitars

  • Email
  • Facebook
  • Instagram
  • YouTube

Technical Articles

Why do old guitars sound better?

Why do some old guitars sound so good? Even inexpensive guitars can age into really good sounding instruments, and some old guitars attain legendary tone. Why is this? The answer can be found in one of three factors and the best combine all of … [Read More...]

More Technical Articles

Viewpoint Articles

The Three Elements of a Great Guitar

Guitar players and collectors have so many choices available to them. New, used, factory brands, custom hand built...how do you narrow down the choices to the best option for you? In my opinion, any guitar should be measured by three … [Read More...]

More Viewpoint Articles

Copyright © 2021 Dogwood Guitars