Dogwood Guitars

  • Home
  • About
  • Guitars
    • Dogwood Models
    • Guitar Galleries
    • Ordering your Dogwood Guitar
    • FAQ’s
  • Services
  • Lutherie Classes
  • Pictorials
    • Repairs
    • How to Correctly String a Guitar
    • Building A Monarch
    • Making a Spalted Maple Rosette
    • Pearl and Abalone Inlay
  • Articles
    • Technical
    • Viewpoint
  • Testimonials
  • YouTube
  • Contact
You are here: Home / Pictorials / Repairs / 1932 Martin 0-18 Parlor Guitar

1932 Martin 0-18 Parlor Guitar

It’s not often that a luthier has the opportunity to work on a pre-war Martin. This little 1932 Parlor 0-18 came to the shop in very rough condition. It took a tumble down some stairs, resulting in a long crack in the treble side of the body and several smaller cracks. In addition to this damage the guitar had several issues including a very bad neck angle. The wood and the finish were extremely dry and fragile, but hey- this guitar is 80 years old! I did the work for a family friend (the guitar belonged to her grandfather) and the goal was to make the guitar playable and to restore the structural integrity while keeping the cost as affordable as possible. Check out the photo gallery below for photos of the work.

[Show as slideshow]
img_0168
img_0166
img_0169

img_0175
img_0176
img_0177

img_0180
◄ 1 2
  • Email
  • Facebook
  • YouTube

Blog: Spalted Maple Rosette

I love spalted wood, especially spalted Maple. My affection toward this unique combination of color and pattern goes back to the 1980's, when I became introduced to the work of James Krenov. In 1983 a friend and I discovered a huge spalted Maple … [Read More...]

Guitar Building, Voicing, and Repair Classes

Greg loves teaching guitar building and repair as much as he loves building guitars himself. Although not currently taking on an apprentice, Greg is offering individual classes in three areas: Acoustic and Electric Guitar Setup and Repair, Guitar … [Read More...]

Building a Monarch: Final Assembly

It is now time to assemble the guitar, dress the frets, install the bridge and pins, fit and install the tuners, make the nut and saddle, and set the final action. A pickguard is usually installed and the completed instrument is polishes and strung … [Read More...]

Customer Testimonials: Martin Fret Work

"I took my Martin D-28 to Dogwood guitars to get it worked on, It was in pretty bad shape when I bought it used. Someone had tried to install frets on their own and it was buzzing and the action was hard to play. I called Greg and he said to stop by … [Read More...]

Building a Monarch: Pearl Inlay

Shell inlays are a time-honored way of adding flair, beauty, and value to musical instruments. The two primary types of shell used in making guitar inlays are Mother of Pearl and Abalone. Each of these come in several color varieties. There are many … [Read More...]

Baking Tops

A number of guitar builders (including a couple of well-known factory-made brands) follow the practice of baking the Spruce tops in an oven at low heat prior to using them in the construction of an instrument. This practice has caused a lot of … [Read More...]

Visit us on YouTube…

Follow Dogwood Guitars

  • Email
  • Facebook
  • Instagram
  • YouTube

Technical Articles

Humidity, Temperature, and Your Guitar

Maintaining your wooden instruments at an appropriate level of humidity year round is vital to their health and well-being. It is surprising how many owners of expensive instruments are unaware of this. I suppose that the primary reason is a lack … [Read More...]

More Technical Articles

Viewpoint Articles

Why Buy a Handmade Guitar?

There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most … [Read More...]

More Viewpoint Articles

Copyright © 2025 Dogwood Guitars