DSCN1315

Epiphone Sheraton Tuneup

Epiphone Sheraton Tuneup and Setup One of my good customers brought me this Sheraton for some upgrades, including new pickups and a bone nut. During my initial evaluation I discovered many loose fret ends and a high tongue, which were causing … [Read More...]

Building a Monarch: The Neck

Guitar construction can be divided into to major sections: The body and the neck. Neck construction begins with gluing up a blank. Although some guitar necks are made from one solid piece of wood, many builders make necks using a laminated blank. … [Read More...]

Customer Testimonial:

"My stage guitar had buzzing strings and the sound from the pickup was unbalanced. Greg made me a new bone saddle to replace the poorly fitted plastic one and did a setup, now I have a guitar with no issues. His knowledge of guitar geometry is … [Read More...]

The Importance of a Good Setup, Part Two

In the first part of this article, I discussed the elements of a basic setup. These include checking the neck relief and the action at the first and twelfth frets, as well as installing new strings and performing a few other basic adjustments. In … [Read More...]

Building a Monarch: Final Assembly

It is now time to assemble the guitar, dress the frets, install the bridge and pins, fit and install the tuners, make the nut and saddle, and set the final action. A pickguard is usually installed and the completed instrument is polishes and strung … [Read More...]

Making a Spalted Maple Rosette

The rosette on an acoustic guitar, along with the peghead and bridge designs, is a big part of the custom builder's signature. Often a particular design will immediately identify the guitar as being made by a specific individual. Perhaps the amazing … [Read More...]

DSCN1315

Visit us on YouTube…

Technical Articles

Voicing and Tap Tuning of Acoustic Guitars

Viewpoint Articles

Exploring Common Guitar Myths

Visit us on YouTube…

Follow Dogwood Guitars

Technical Articles

Viewpoint Articles