Dogwood Guitars

  • Home
  • About
  • Guitars
    • Dogwood Models
    • Guitar Galleries
    • Ordering your Dogwood Guitar
    • FAQ’s
  • Services
  • Lutherie Classes
  • Pictorials
    • Repairs
    • How to Correctly String a Guitar
    • Building A Monarch
    • Making a Spalted Maple Rosette
    • Pearl and Abalone Inlay
  • Articles
    • Technical
    • Viewpoint
  • Testimonials
  • YouTube
  • Contact
You are here: Home / Building A Monarch / Building a Monarch: Top and Back

Building a Monarch: Top and Back

The building of any guitar begins with selecting the woods to be used. A bookmatched set of Spruce or Cedar is selected for the top, and a back and side set is chosen for the body. Standard woods for the latter are Rosewood, Mahogany, or Maple. Many other woods can be used, and the choice is primarily one of personal taste.

The top and back sets are carefully laid out for best use of grain and figure, glued up, and thicknessed. The shapes are cut out using templates and the braces are glued into place. In a standard build, the braces are carved and shaped at this time. If the builder voices and tunes the top and back, this is done as part of the boxing process… see Part Two of this blog. The photos in the gallery below show the steps involved to make and brace the back and top of a Monarch guitar.

[Show as slideshow]
dogwoodguitars_blog_mahogany_01_plates
dogwoodguitars_blog_mahogany_02_plates
dogwoodguitars_blog_mahogany_03_plates

dogwoodguitars_blog_mahogany_04_rosette
dogwoodguitars_blog_mahogany_05_rosette
dogwoodguitars_blog_mahogany_06_braces

dogwoodguitars_blog_mahogany_07_braces
dogwoodguitars_blog_mahogany_08_braces
dogwoodguitars_blog_mahogany_09_braces

dogwoodguitars_blog_mahogany_10_braces
dogwoodguitars_blog_mahogany_11_braces
dogwoodguitars_blog_mahogany_13_braces

dogwoodguitars_blog_mahogany_12_braces
dogwoodguitars_blog_mahogany_14_braces
dogwoodguitars_blog_mahogany_15_braces

dogwoodguitars_blog_mahogany_16_braces
dogwoodguitars_blog_mahogany_17_braces
  • Email
  • Facebook
  • YouTube

Customer Testimonial: Taylor Custom setup and upgrades

Greg, when I met you and talked with you, it helped ease my apprehensions. You were very professional and explained in detail what, why, and how you would make my guitar play and sound better. You said that guitars sound what they sound like, but you … [Read More...]

Customer Testimonials: Taylor 12 string setup

I had a well known luthier in Columbus do a setup on my custom Taylor 12 string including having a bone saddle and nut made. The work seemed good but a while later while using the guitar for recording I noticed a strange light buzzing sound in the B … [Read More...]

Building a Monarch: Pearl Inlay

Shell inlays are a time-honored way of adding flair, beauty, and value to musical instruments. The two primary types of shell used in making guitar inlays are Mother of Pearl and Abalone. Each of these come in several color varieties. There are many … [Read More...]

Customer Testimonials: Morgan Monroe

Greg... Thanks again for the top notch work you performed on my Morgan Monroe. Although this guitar is an expendable "gigging" tool you made it sound and play like a much more expensive instrument. It sure is comforting to know someone with your … [Read More...]

Building a Monarch: Final Assembly

It is now time to assemble the guitar, dress the frets, install the bridge and pins, fit and install the tuners, make the nut and saddle, and set the final action. A pickguard is usually installed and the completed instrument is polishes and strung … [Read More...]

About Our Name

Many people ask about our name. One of my wife's friends even asked her if I made guitars from any other wood besides Dogwood! For those familiar with the Dogwood tree, this brings a chuckle since this flowering beauty attains only a small size… … [Read More...]

Visit us on YouTube…

Follow Dogwood Guitars

  • Email
  • Facebook
  • Instagram
  • YouTube

Technical Articles

Bolt-On Necks: High Tongue Frets

I am including this article as a special page in the Services Menu because of the frequency with which the issue of high tongue frets arises. The tongue is the part of the fretboard that extends into the body of the guitar. On acoustic guitars, the … [Read More...]

More Technical Articles

Viewpoint Articles

Why Buy a Handmade Guitar?

There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most … [Read More...]

More Viewpoint Articles

Copyright © 2025 Dogwood Guitars