Greg Maxwell, Author at Dogwood Guitars - Page 7 of 7

The Kingston Jumbo

I’ve always been particularly drawn to jumbo-size acoustics. I learned to play guitar in the early 1970’s when John Denver was at the height of his career, and the sound he got from his jumbo Guild 6 and 12 string guitars made an impression on me that lasts to this day. I own one of […]

The Eminence

The Eminence is a Grand Auditorium sized guitar that I designed to provide a slight boost to the treble response, along with the clear and balanced tone that all Dogwood models are known for. A slightly smaller body depth and a more narrow waist result in bell-like clarity that is especially suited to finger style […]

1968 Fender Jazz Bass Neck Work

A customer brought me a very cool 1968 Fender Jazz Bass neck. The neck is fretless and- as the Beatles would say, “very strange”- it had no nut slot. There was also a piece of binding missing at the heel. The customer was interested in having the neck fretted, a nut made and installed, and […]

1975 Gibson Hummingbird Restoration

While meeting with a customer and his daughter about designing a guitar for her, he showed me his Gibson Hummingbird that his daughter had been playing. Using the serial number and other identifying characteristics, I was able to date the guitar … [Read More...]

1932 Martin 0-18 Parlor Guitar

It's not often that a luthier has the opportunity to work on a pre-war Martin. This little 1932 Parlor 0-18 came to the shop in very rough condition. It took a tumble down some stairs, resulting in a long crack in the treble side of the body and … [Read More...]

Making a Spalted Maple Rosette

The rosette on an acoustic guitar, along with the peghead and bridge designs, is a big part of the custom builder's signature. Often a particular design will immediately identify the guitar as being made by a specific individual. Perhaps the amazing … [Read More...]

Customer Testimonials: Taylor 12 string setup

I had a well known luthier in Columbus do a setup on my custom Taylor 12 string including having a bone saddle and nut made. The work seemed good but a while later while using the guitar for recording I noticed a strange light buzzing sound in the B … [Read More...]

Customer Testimonials: A. B. Manson Acoustic

"I recently had major work done by Greg Maxwell on my very expensive and treasured old guitar. Boy, am I glad that I found Greg, because I do not think any other luthier would have given the time and effort this project required. My guitar needed … [Read More...]

Exceptional Tonewoods

Fine wood is the heart of every Dogwood guitar. Greg has been collecting rare and highly figured wood for over three decades, and he is always on the lookout for the best sets of both top and back/side wood for his custom guitars. Exotic wood of the … [Read More...]