Dogwood Guitars

  • Home
  • About
  • Guitars
    • Dogwood Models
    • Guitar Galleries
    • Ordering your Dogwood Guitar
    • FAQ’s
  • Services
  • Lutherie Classes
  • Pictorials
    • Repairs
    • How to Correctly String a Guitar
    • Building A Monarch
    • Making a Spalted Maple Rosette
    • Pearl and Abalone Inlay
  • Articles
    • Technical
    • Viewpoint
  • Testimonials
  • YouTube
  • Contact
You are here: Home / Pictorials / Repairs / 1932 Martin 0-18 Parlor Guitar

1932 Martin 0-18 Parlor Guitar

It’s not often that a luthier has the opportunity to work on a pre-war Martin. This little 1932 Parlor 0-18 came to the shop in very rough condition. It took a tumble down some stairs, resulting in a long crack in the treble side of the body and several smaller cracks. In addition to this damage the guitar had several issues including a very bad neck angle. The wood and the finish were extremely dry and fragile, but hey- this guitar is 80 years old! I did the work for a family friend (the guitar belonged to her grandfather) and the goal was to make the guitar playable and to restore the structural integrity while keeping the cost as affordable as possible. Check out the photo gallery below for photos of the work.

[Show as slideshow]
dscn1451
dscn1452
dscn1454

dscn1455
dscn1456
img_0179

img_0181
img_0153
img_0154

img_0156
img_0155
img_0158

img_0159
img_0157
img_0160

img_0165
img_0161
img_0167

img_0162
img_0164
img_0163

1 2 ►
  • Email
  • Facebook
  • YouTube

The Importance of a Good Setup, Part Two

In the first part of this article, I discussed the elements of a basic setup. These include checking the neck relief and the action at the first and twelfth frets, as well as installing new strings and performing a few other basic adjustments. In … [Read More...]

Blog: Spalted Maple Rosette

I love spalted wood, especially spalted Maple. My affection toward this unique combination of color and pattern goes back to the 1980's, when I became introduced to the work of James Krenov. In 1983 a friend and I discovered a huge spalted Maple … [Read More...]

The Eminence

The Eminence is a Grand Auditorium sized guitar that I designed to provide a slight boost to the treble response, along with the clear and balanced tone that all Dogwood models are known for. A slightly smaller body depth and a more narrow waist … [Read More...]

Gibson Side Crack

Gibson Artist Side Cracks This guitar was brought to me with some serious bass side damage- the owner had been keeping time on the side with his hand during a break and had cracked the side badly. The cracks ran from the shoulder all the way to … [Read More...]

Bending Machine

Building a Monarch: The Box

Bending the sides begins the process of making a guitar body. A bending form is required for each type and size of body, and the appropriate form is installed in the bending machine. This jig uses a heating blanket and spring loaded cauls to gently … [Read More...]

Customer Testimonial: Gibson Setup

"I thought my new Gibson acoustic played pretty well until I had Greg set it up for me. Wow! I could tell a real difference in the action. Based on that experience I had him do a fret dress on an older Ibanez and again, I was surprised at how much … [Read More...]

Visit us on YouTube…

Follow Dogwood Guitars

  • Email
  • Facebook
  • Instagram
  • YouTube

Technical Articles

Voicing and Tap Tuning of Acoustic Guitars

Voicing and tuning are important elements of great tone. A great guitar has great tone, great playability, and great appearance, in that order. Fancy wood, a high gloss finish, and lots of Abalone inlay are visually beautiful but have … [Read More...]

More Technical Articles

Viewpoint Articles

Why Buy a Handmade Guitar?

There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most … [Read More...]

More Viewpoint Articles

Copyright © 2025 Dogwood Guitars