Dogwood Guitars

  • Home
  • About
  • Guitars
    • Dogwood Models
    • Guitar Galleries
    • Ordering your Dogwood Guitar
    • FAQ’s
  • Services
  • Lutherie Classes
  • Pictorials
    • Repairs
    • How to Correctly String a Guitar
    • Building A Monarch
    • Making a Spalted Maple Rosette
    • Pearl and Abalone Inlay
  • Articles
    • Technical
    • Viewpoint
  • Testimonials
  • YouTube
  • Contact

FAQ’s

Answers to some of the most common questions I get about my guitars, ordering, etc. What is the current turn around time for orders? My build schedule is determined by my current repair load and teaching schedule, as well as orders already in process. I am also partially constrained by local weather for the lacquer […]

About Greg Maxwell

I’ve lived in central Ohio my entire life, and I’ve built things for as long as I can remember. I cut my teeth as a woodworker doing fancy interior wood trim for a custom home builder in the early 80’s after deciding that performing music for a living wasn’t something I wanted to do for […]

About Our Name

Many people ask about our name. One of my wife’s friends even asked her if I made guitars from any other wood besides Dogwood! For those familiar with the Dogwood tree, this brings a chuckle since this flowering beauty attains only a small size… not a species suited to yielding timber of a sufficient dimensions […]

Shop Tour

The original Dogwood Guitars shop, located in rural central Ohio. The Dogwood Guitars shop is located in Mount Vernon, OH, having relocated back to central Ohio in August of 2017 after operating for five years in Kansas City. The shop is fully equipped for all manner of repairs, restorations, setup work, fretwork, as well as […]

Location

Dogwood Guitars is located in beautiful rural Knox County Ohio, on state route 3 between Centerburg and Mount Vernon. Less than an hour from Columbus, Delaware, and Mansfield, we serve the entire central Ohio area with full-service setup and repairs. Customers are welcome to visit the shop by appointment. The shop is not a retail […]

  • 1
  • 2
  • Next Page »

Building a Monarch: Final Assembly

It is now time to assemble the guitar, dress the frets, install the bridge and pins, fit and install the tuners, make the nut and saddle, and set the final action. A pickguard is usually installed and the completed instrument is polishes and strung … [Read More...]

Warranty Information

Dogwood acoustic guitars have a lifetime warranty against defects in materials and workmanship. This warranty applies to the original owner and will be honored for as long as I am actively building and repairing guitars. This warranty does not cover … [Read More...]

Exceptional Tonewoods

Fine wood is the heart of every Dogwood guitar. Greg has been collecting rare and highly figured wood for over three decades, and he is always on the lookout for the best sets of both top and back/side wood for his custom guitars. Exotic wood of the … [Read More...]

The Science and Theory of Tonewoods

Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce … [Read More...]

Building a Monarch: Spraying Lacquer

Most guitar players want instruments with a high gloss finish. Nitrocellulose lacquer is the traditional finish for the best guitars. It is durable and unlike some other finishes, it can be repaired later. Oil, poly, and water-based finishes are also … [Read More...]

Blog: Spalted Maple Rosette

I love spalted wood, especially spalted Maple. My affection toward this unique combination of color and pattern goes back to the 1980's, when I became introduced to the work of James Krenov. In 1983 a friend and I discovered a huge spalted Maple … [Read More...]

Visit us on YouTube…

Follow Dogwood Guitars

  • Email
  • Facebook
  • Instagram
  • YouTube

Technical Articles

Bolt-On Necks: High Tongue Frets

I am including this article as a special page in the Services Menu because of the frequency with which the issue of high tongue frets arises. The tongue is the part of the fretboard that extends into the body of the guitar. On acoustic guitars, the … [Read More...]

More Technical Articles

Viewpoint Articles

The Three Elements of a Great Guitar

Guitar players and collectors have so many choices available to them. New, used, factory brands, custom hand built...how do you narrow down the choices to the best option for you? In my opinion, any guitar should be measured by three … [Read More...]

More Viewpoint Articles

Copyright © 2025 Dogwood Guitars