Dogwood Guitars

  • Home
  • Semi-Retirement
  • Guitar Galleries
  • Services
  • Lutherie Classes
  • Contact

Images tagged "guitar"

[Show as slideshow]
dogwoodguitars_gibsonrepair_01
dogwoodguitars_gibsonrepair_02
dogwoodguitars_gibsonrepair_03

dogwoodguitars_gibsonrepair_04
dogwoodguitars_gibsonrepair_05
dogwoodguitars_gibsonrepair_06

dogwoodguitars_gibsonrepair_07
dogwoodguitars_gibsonrepair_08
dogwoodguitars_gibsonrepair_09

dogwoodguitars_gibsonrepair_10
dogwoodguitars_gibsonrepair_11
dogwoodguitars_gibsonrepair_12

dogwoodguitars_gibsonrepair_13
dogwoodguitars_gibsonrepair_14
dogwoodguitars_gibsonrepair_15

dogwoodguitars_gibsonrepair_16
dogwoodguitars_gibsonrepair_17
dogwoodguitars_gibsonrepair_18

dogwoodguitars_gibsonrepair_19
dogwoodguitars_gibsonrepair_20
dogwoodguitars_gibsonrepair_21

1 2 ►

1977 Martin D-18 Restoration

Older Martins often need substantial work to restore them to excellent playability. Recently a 1977 Martin D-18 was brought to me for evaluation. The guitar needed a neck reset, fret work, bridge plate repair, and cracks in the top repaired. A new … [Read More...]

Epiphone Sheraton Tuneup

Epiphone Sheraton Tuneup and Setup One of my good customers brought me this Sheraton for some upgrades, including new pickups and a bone nut. During my initial evaluation I discovered many loose fret ends and a high tongue, which were causing … [Read More...]

Customer Testimonial: Les Paul Setup

"The work you did on the fretboard, frets and bridge of my Les Paul fixed the problem I was having and it plays better than ever. Dogwood Guitars has become my #1 choice for guitar repairs and I'll be sure to recommend you to my musician friends. … [Read More...]

1932 Martin 0-18 Parlor Guitar

It's not often that a luthier has the opportunity to work on a pre-war Martin. This little 1932 Parlor 0-18 came to the shop in very rough condition. It took a tumble down some stairs, resulting in a long crack in the treble side of the body and … [Read More...]

Customer Testimonials: Taylor 12 string setup

I had a well known luthier in Columbus do a setup on my custom Taylor 12 string including having a bone saddle and nut made. The work seemed good but a while later while using the guitar for recording I noticed a strange light buzzing sound in the B … [Read More...]

Customer Testimonials: European Maple Eminence

"Several years ago when I found out that Greg was starting to make hand made guitars, I knew that I wanted one. Did I need one? No, but that didn't mean I wanted it any less! This past January my wife out of the blue said I should contact Greg and … [Read More...]

Copyright © 2026 Dogwood Guitars