dogwoodguitars_carving_2

Making a Spalted Maple Rosette

The rosette on an acoustic guitar, along with the peghead and bridge designs, is a big part of the custom builder's signature. Often a particular design will immediately identify the guitar as being made by a specific individual. Perhaps the amazing … [Read More...]

The Mazzaroth Guitar

The Mazzaroth Guitar, Special Edition of the Eminence Model This fine instrument is the culmination of an idea I had in the 1970's after seeing a guitar that luthier Steve Klein made for Dan Peek, founding member of the group America. Inspired … [Read More...]

1932 Martin 0-18 Parlor Guitar

It's not often that a luthier has the opportunity to work on a pre-war Martin. This little 1932 Parlor 0-18 came to the shop in very rough condition. It took a tumble down some stairs, resulting in a long crack in the treble side of the body and … [Read More...]

Epiphone Sheraton Tuneup

Epiphone Sheraton Tuneup and Setup One of my good customers brought me this Sheraton for some upgrades, including new pickups and a bone nut. During my initial evaluation I discovered many loose fret ends and a high tongue, which were causing … [Read More...]

The Kingston Jumbo

I've always been particularly drawn to jumbo-size acoustics. I learned to play guitar in the early 1970's when John Denver was at the height of his career, and the sound he got from his jumbo Guild 6 and 12 string guitars made an impression on me … [Read More...]

Customer Testimonials: Taylor 12 string setup

I had a well known luthier in Columbus do a setup on my custom Taylor 12 string including having a bone saddle and nut made. The work seemed good but a while later while using the guitar for recording I noticed a strange light buzzing sound in the B … [Read More...]