Dogwood Guitars

  • Home
  • About
  • Guitars
    • Dogwood Models
    • Guitar Galleries
    • Ordering your Dogwood Guitar
    • FAQ’s
  • Services
  • Lutherie Classes
  • Pictorials
    • Repairs
    • How to Correctly String a Guitar
    • Building A Monarch
    • Making a Spalted Maple Rosette
    • Pearl and Abalone Inlay
  • Articles
    • Technical
    • Viewpoint
  • Testimonials
  • YouTube
  • Contact
You are here: Home / Pictorials / Repairs / Gibson Side Crack

Gibson Side Crack

Gibson Artist Side Cracks

This guitar was brought to me with some serious bass side damage- the owner had been keeping time on the side with his hand during a break and had cracked the side badly. The cracks ran from the shoulder all the way to the bout. This owner prefers to keep his guitars really dry and this contributed to the extent of the damage. The Gibson has a couple of other previously repaired cracks and cosmetically it is not in great condition. The owner simply wanted the cracks repaired to the point of stability and the area sealed against moisture. This is adequate and less costly than an invisible factory quality finish repair. This photo gallery shows how even a very bad crack can be adequately repaired.

[Show as slideshow]
dscn1389
dscn1391
dscn1393

dscn1399
dscn1400
dscn1401

dscn1402
dscn1403
dscn1425

  • Email
  • Facebook
  • YouTube

Customer Testimonials: Taylor 12 string setup

I had a well known luthier in Columbus do a setup on my custom Taylor 12 string including having a bone saddle and nut made. The work seemed good but a while later while using the guitar for recording I noticed a strange light buzzing sound in the B … [Read More...]

Blog: 1932 Martin Repair

Its not often that a luthier has the opportunity to work on a pre-war Martin. This 1932 0-18 parlor guitar needs a crack repair and a neck reset. Great care must be taken when working on such an old and fragile guitar. Get out the hot hide glue. … [Read More...]

Blog: Jumbo Neck Set

It is always exciting to arrive at neck setting day when working on a new build. Several weeks of careful work precede setting the neck: Rosette making; bending and boxing; bindings and purflings; inlay work; voicing and tuning; all separate skills … [Read More...]

How to Correctly String a Guitar

When I went to lutherie school I discovered that, like many guitarists, I was stringing my guitars incorrectly. And judging from the inspections that I give to all the guitars that come into my shop, this is a very common problem. I can hear some … [Read More...]

Lutherie Classes: Setup and Repair

Acoustic and Electric Guitar Repair and Setup Classes Have you thought about learning guitar repair and setup? Have you considered attending a lutherie school but found the distance and cost to be prohibitive? Or maybe you simply want to learn how … [Read More...]

Customer Testimonial: Taylor Custom setup and upgrades

Greg, when I met you and talked with you, it helped ease my apprehensions. You were very professional and explained in detail what, why, and how you would make my guitar play and sound better. You said that guitars sound what they sound like, but you … [Read More...]

Visit us on YouTube…

Follow Dogwood Guitars

  • Email
  • Facebook
  • Instagram
  • YouTube

Technical Articles

Bolt-On Necks: High Tongue Frets

I am including this article as a special page in the Services Menu because of the frequency with which the issue of high tongue frets arises. The tongue is the part of the fretboard that extends into the body of the guitar. On acoustic guitars, the … [Read More...]

More Technical Articles

Viewpoint Articles

The Three Elements of a Great Guitar

Guitar players and collectors have so many choices available to them. New, used, factory brands, custom hand built...how do you narrow down the choices to the best option for you? In my opinion, any guitar should be measured by three … [Read More...]

More Viewpoint Articles

Copyright © 2025 Dogwood Guitars