Dogwood Guitars

  • Home
  • Semi-Retirement
  • Guitar Galleries
  • Services
  • Lutherie Classes
  • Contact
You are here: Home / Pictorials / Repairs / 1975 Gibson Hummingbird Restoration

1975 Gibson Hummingbird Restoration

While meeting with a customer and his daughter about designing a guitar for her, he showed me his Gibson Hummingbird that his daughter had been playing.

Using the serial number and other identifying characteristics, I was able to date the guitar as a 1975. This confirmed the owner’s recollection that the Hummingbird was a mid-70’s instrument which he had purchased used after graduating from high school in the early 1980’s.

The guitar was in pretty rough condition, mostly due to some poorly done older repairs. The bridge was not original and had been glued on in the wrong location causing the guitar to play out of tune. The bridge plate inside the guitar was damaged and the replacement bridge was shaved too thin and had cracked. The guitar also needed a neck reset and some cracks in the top repaired. I agreed to take on these repairs and to make the guitar playable for the daughter while her Dogwood Guitar was being made. Click the thumbnail image below for a photo essay detailing the repairs made to the guitar.

[Show as slideshow]
dogwoodguitars_gibsonrepair_01
dogwoodguitars_gibsonrepair_02
dogwoodguitars_gibsonrepair_03

dogwoodguitars_gibsonrepair_04
dogwoodguitars_gibsonrepair_05
dogwoodguitars_gibsonrepair_06

dogwoodguitars_gibsonrepair_07
dogwoodguitars_gibsonrepair_08
dogwoodguitars_gibsonrepair_09

dogwoodguitars_gibsonrepair_10
dogwoodguitars_gibsonrepair_11
dogwoodguitars_gibsonrepair_12

dogwoodguitars_gibsonrepair_13
dogwoodguitars_gibsonrepair_14
dogwoodguitars_gibsonrepair_15

dogwoodguitars_gibsonrepair_16
dogwoodguitars_gibsonrepair_17
dogwoodguitars_gibsonrepair_18

dogwoodguitars_gibsonrepair_19
dogwoodguitars_gibsonrepair_20
dogwoodguitars_gibsonrepair_21

1 2 ►

Epiphone Sheraton Tuneup

Epiphone Sheraton Tuneup and Setup One of my good customers brought me this Sheraton for some upgrades, including new pickups and a bone nut. During my initial evaluation I discovered many loose fret ends and a high tongue, which were causing … [Read More...]

The Kingston Jumbo

I've always been particularly drawn to jumbo-size acoustics. I learned to play guitar in the early 1970's when John Denver was at the height of his career, and the sound he got from his jumbo Guild 6 and 12 string guitars made an impression on me … [Read More...]

1932 Martin 0-18 Parlor Guitar

It's not often that a luthier has the opportunity to work on a pre-war Martin. This little 1932 Parlor 0-18 came to the shop in very rough condition. It took a tumble down some stairs, resulting in a long crack in the treble side of the body and … [Read More...]

Customer Testimonials: European Maple Eminence

"Several years ago when I found out that Greg was starting to make hand made guitars, I knew that I wanted one. Did I need one? No, but that didn't mean I wanted it any less! This past January my wife out of the blue said I should contact Greg and … [Read More...]

Luthier Services & Labor Estimates for 2026

I am semi-retired but taking on some work at my discretion. Please see my Retirement Announcement in the menu for details. … [Read More...]

Customer Testimonials: Martin Fret Work

"I took my Martin D-28 to Dogwood guitars to get it worked on, It was in pretty bad shape when I bought it used. Someone had tried to install frets on their own and it was buzzing and the action was hard to play. I called Greg and he said to stop by … [Read More...]

Copyright © 2025 Dogwood Guitars