Dogwood Guitars

  • Home
  • Semi-Retirement
  • Guitar Galleries
  • Services
  • Lutherie Classes
  • Contact
You are here: Home / Pictorials / Repairs / Epiphone Sheraton Tuneup

Epiphone Sheraton Tuneup

Epiphone Sheraton Tuneup and Setup

One of my good customers brought me this Sheraton for some upgrades, including new pickups and a bone nut. During my initial evaluation I discovered many loose fret ends and a high tongue, which were causing string buzzing. My customer agreed to a fret dress (level, crown, and polish) and this pictorial shows highlights of the work.

dscn1324 dscn1329 dscn1328 dscn1325 dscn1326 dscn1327 dscn1330 dscn1331 dscn1333
[Show picture list]

Customer Testimonials: Monarch 12 String

"Greg Maxwell's 12-string Monarch guitar is the product of an artist. I played the guitar among a small of group of rock-climbing paramedics during my interim stay in Richmond, Kentucky, before returning to Kailua, Hawaii, and the comments about the … [Read More...]

Making a Spalted Maple Rosette

The rosette on an acoustic guitar, along with the peghead and bridge designs, is a big part of the custom builder's signature. Often a particular design will immediately identify the guitar as being made by a specific individual. Perhaps the amazing … [Read More...]

Customer Testimonial: Les Paul Setup

"The work you did on the fretboard, frets and bridge of my Les Paul fixed the problem I was having and it plays better than ever. Dogwood Guitars has become my #1 choice for guitar repairs and I'll be sure to recommend you to my musician friends. … [Read More...]

Guitar Build Class: Tom S.

"I recently completed a rewarding two week twelve day deep dive into guitar building. The course was taught by Greg Maxwell of Dogwood Guitars in Mt. Vernon Ohio. “Course” is inadequate to describe this skill and technique refining experience.  … [Read More...]

1968 Fender Jazz Bass Neck Work

A customer brought me a very cool 1968 Fender Jazz Bass neck. The neck is fretless and- as the Beatles would say, "very strange"- it had no nut slot. There was also a piece of binding missing at the heel. The customer was interested in having the … [Read More...]

Customer Testimonials: European Maple Eminence

"Several years ago when I found out that Greg was starting to make hand made guitars, I knew that I wanted one. Did I need one? No, but that didn't mean I wanted it any less! This past January my wife out of the blue said I should contact Greg and … [Read More...]

Copyright © 2026 Dogwood Guitars